محمل مصبوب من السيليكون + خيط خارجي من الفولاذ المقاوم للصدأ

إرسال الاستفسار

وصف
أقطار فنية

سؤال	PDF	محمل مصبوب من السيليكون + خيط خارجي من الفولاذ المقاوم للصدأ		حجم متخلف			Screw size				استبدال الاسم الرمزي Misumi
سؤال	PDF	رقم سري	bearing No.	Inner diameter mm	Outer diameter mm	Thickness mm	تحمل مدمج	Step protruding C	Screw length L	Thread M	استبدال الاسم الرمزي Misumi
		91	6200-40-9C4.5L10M8	10	40	9	6200	4.5	10	8	/
		92	6200-40-9C5L10M8	10	40	9	6200	5	10	8	/
		93	6200-40-9C1L12M6	10	40	9	6200	/	12	6	SUMBT10-40A
		94	6200-40-9C2.5L12M616	10	40	9	6200	2.5	12	6	/
		95	6200-40-9C3.5L12M8 18	10	40	9	6200	3.5	12	8	/
		96	6200-40-11C1L8M6	10	40	11	6200	/	8	6	SUMBH10-40
		97	6200-40-1102.5L10M818	10	40	11	6200	2.5	10	8	/
		98	6200-40-11C3.5L10M8 M8	10	40	11	6200	3.5	10	8	/
		99	6200-40-11C4L10M8 3	10	40	11	6200	4	10	8	/
		100	6200-40-11C1L12M6 3	10	40	11	6200	/	12	6	SUMBT10-40
		101	6200-40-11C1.5L12M6 W6	10	40	11	6200	1.5	12	6	/
		102	6200-40-11C25L12M8 M8	10	40	11	6200	2.5	12	8	/
		103	6002-40-9C1L12M100	15	40	9	6002	/	12	10	SUMBH15-40A
		104	6002-40-9C2.5L12M10110	15	40	9	6002	2.5	12	10	/
		105	6002-40-9C1L20M100	15	40	9	6002	/	20	10	SUMBT15-40A
		106	6002-40-9C2.5L20M10110	15	40	9	6002	2.5	20	10	/
		107	6002-40-9C5L12M100	15	40	9	6002	5	12	10	/
		108	-6002-40-9C10L15M10	15	40	9	6002	10	15	10	/
		109	6002-40-12C1L12M1010	15	40	12	6002	/	12	10	SUMBT15-40
		110	6002-40-12C1L20M1010	12	40	12	6002	/	20	10	SUMBT15-40
		111	6002-40-1208.5L15M10110	12	40	12	6002	8.5	15	10	/
		112	6202-45-11C1L12M1010	15	45	11	6202	1	12	10	SUMBH15.45A
		113	6202-45-11C3L12M1010	15	45	11	6202	3	12	10	/
		114	6202-45-1104L12M10	15	45	11	6202	/	12	10	/
		115	6202-45-11C1L20M1010	15	45	11	6202	/	20	10	SUMBT15-45A
		116	6202-45-11C3L20M1010	15	45	11	6202	3	20	10	/
		117	6202-45-11C8L12M1010	15	45	11	6202	8	12	10	/
		118	6202-45-15C1L12M1010	15	45	15	6202	/	12	10	SUMBH15.45
		119	6202-45-1502L12M10 )	15	45	15	6202	2	12	10	/
		120	6202-45-15C1L20M1010	15	45	15	6202	/	20	10	SUMBT15-45
Previous 1 2 345 Next

1. ما هو المحمل المطلي بالمطاط؟

يشير المحمل المطلي بالمطاط إلى محمل غير قياسي مناسب للاستخدام في ظل ظروف معينة، ويتم تشكيله عن طريق حقن أو ربط المنتجات المطاطية على سطح المحمل من خلال قالب الصب.

2. خصائص وتصنيف المحامل المغلفة بالمطاط

Rubber-coated bearings have excellent strength and wear resistance, heat resistance, hydrolysis resistance, and aging resistance. They have bright appearance, fine and smooth colloid surface, strong bonding between the colloid material and the shaft core, and a wide range of hardness.

In addition, rubber-coated bearings have the advantages of shock load resistance and low noise compared to ordinary bearings. Commonly used coating materials include the following:

(1) Polyurethane rubber rollers have good chemical properties, good solvent resistance, anti-aging, tear resistance, and good resilience.

(2) Silicone rubber coated bearings have good heat resistance, cold resistance, ozone and atmospheric aging resistance. The lack of electricity results in poor mechanical properties such as tensile strength and tear strength, and poor oil resistance and organic solvent resistance.

(3) Polyacetal (POM) coated bearings have high mechanical strength and rigidity, high fatigue strength, good resistance to organic solvents, and stronger wear resistance than polyurethane. However, they have the disadvantages of poor acid resistance, large molding shrinkage, and long life.

Easily decomposes under high temperature.

In addition, there are also rubber-coated bearings made of nitrile rubber, fluororubber and other coating materials.